Loading... Please wait...
Categories
New Products
Our Newsletter
Product Description
The MAN is a 2 Position, power-open, power-close actuator. Used on old-style, standard opposed blade dampers. The MAN actuators are only interchangeable with other MAN or MA-5P units.
The MAN is a 2 Position, power-open, power-close actuator. Used on old-style, standard opposed blade dampers. The MAN actuators are only interchangeable with other MAN or MA-5P units. For more information go to: http://www.ewccontrols.com/acrobat/090377a0066.pdf
Product Reviews
-
Looks better than OEM MSTN
Posted by Unknown on 29th Jul 2019
The first thing I noticed upon looking these over was the better quality wafer material (FR-4 fiberglass PCB material). The second was how much better than OEM the quality of the soldering is (no cold-solder joints here, folks). I haven't installed them yet, but they work fine on the bench. BTW, the only reason the OEM unit lasted 25 years+ is that I'd periodically service the wafer switch (the weak point of the OEM unit); this wafer switch looks better made to me.
-
Easy to swap out, originals lasted a long time
Posted by Unknown on 16th Jul 2018
After 16 years one MAN zone motor went out, replaced it. Now, 4 years later, a 2nd motor just went. I ordered a spare for the 3rd zone which will probably go next, but I'll be happy if I get another 15+ years out of these ones!
-
As expected
Posted by Glenn Hutchinson on 22nd May 2018
HVAC people wanted to charge 600 and I did it myself with a part that is hard to find of an older set up.
-
perfect
Posted by robert josephberg on 29th Mar 2018
Product delivered as promised .new and in original box . Great price !
-
Product is identical replacement but shipping costs too high
Posted by Darwin Busa on 12th Apr 2017
The MAN is identical to the original product and was easy to install. The product cost was very competitive but the shipping cost is far more than actual cost so actual cost still competitive but nothing to get excited about.
-
Damper fixer
Posted by Tom on 7th Nov 2016
The damper that controls the airflow to the first floor stopped working and I was not getting heat on the first when the thermostat was calling for heat. the damper blade turned easily. which meant the controller had stopped working. Replacing the controller was easy and the directions were good and simple to follow. The MAN was identical to the original.
-
Replaced the actuator in my zone valve.
Posted by Unknown on 5th Sep 2016
Perfect replacement. Arrived in two days with standard shipping. 10 minutes to install. Good instructions. Required small hex key was included.
-
replaced two MAN
Posted by Kam on 24th Feb 2015
Replaced two MAN motors in my new home. The house was unoccupied for 2 years. HVAC was blowing way too much hot air to the second floor. First floor damper was barely functioning. Ordered two MAN replacement motors just incase 2nd floor dampers were broken and it was. So ended up replacing both damper motors. Quick and easy to do the replacement. One motor was left in the open position and the other was closed, so verify the motor positions before tidying up. After replacement, the balance of heat was perfect between the two floors. Don't know how long these motors will last, but I'm guessing with some regular maintenances it'll last.
-
Replaced MAN
Posted by Jim B. on 19th Jan 2015
Product working as designed. Damper was not working, stuck in open position, open covering blue box and saw the motor was shot. (noticeable corrosion)
Was happy that I was able to replace the motor and not the whole blade damper because that would of meant removing some dry wall to get out. Took picture of how the old unit was in & wired and just mirrored. plenty of good lighting helps, product comes in the closed position so tighten the blade arm when replacing in the damper blades in closed position. Half hour job - took me 2 hours for some reason. but it is easy to do !!
Customers Who Viewed This Product Also Viewed
-
$160.00$74.00
-
$286.00$142.50
-
$0.00
-
$0.00